Application, Fitting and Installation

Where Perform Panel can be applied.

Perform Panel is designed for internal use, both in wet and dry rooms in commercial, domestic and public areas. It is predominately used in bathrooms, wet rooms, shower enclosures and areas that are exposed to water. It can also be used in several other applications requiring hygienic wall cladding.

Cutting

Perform Panel can easily be cut with either a hand tool or a suitable power tool. If using a handsaw then cut with the decorative side face up, and if using a circular saw then the decorative side should be face down.

Installation

It is essential that any exposed core material on the panels is covered. This is achieved by using aluminium wallboard sections (profiles), which must be sealed before fitting. Any screws used must be counter-sunk anti-corrosive, and panels must be adhered with a high tensile adhesive. All joints, including between panels and profiles must be sealed using sealant.

Here are some of our recommended products:

• Recommended adhesive: Nu-Adhesive 
• Recommended sealant: Nu-Silicone
• Recommended screws: No.6 x 18mm (3/4”)